ภาษาไทย
Product
Product
Product
Product

NOCTUA NA-FH1 8 CHANNEL FAN HUB FOR 12V AND 5V FANS *ชุดท่อพัดลม

(NA-FH1)
NOCTUA
฿1,450
NA-FH1 เป็นฮับพัดลม PWM 8 แชนเนลคุณภาพสูงที่ได้รับการปกป้องอย่างชาญฉลาด ซึ่งช่วยให้สามารถเรียกใช้และควบคุมพัดลม PWM ได้สูงสุดแปดตัวพร้อมกันผ่านส่วนหัวพัดลมเมนบอร์ด PWM เดียวหรือตัวควบคุมแบบสแตนด์อโลน
จุดเด่นสินค้า
ขับเคลื่อนผ่านอินเทอร์เฟซ SATA (สำหรับพัดลม 12V เท่านั้น) NA-FH1 สามารถเรียกใช้พัดลมด้วยกำลังไฟรวมกันสูงสุด 54W
เมื่อใช้อินพุต PWM 4 พินเท่านั้น (สำหรับพัดลม 5V หรือ 12V) การดึงพลังงานสูงสุดอาจสูงถึง 24W
หากเชื่อมต่อทั้งพอร์ตอินพุต S-ATA และ 4 พิน NA-FH1 จะดึงพลังงานโดยอัตโนมัติผ่าน SATA และใช้พอร์ต 4 พินสำหรับการควบคุม PWM
คุณจะสามารถควบคุมพัดลมที่มีการใช้พลังงานสูงได้อย่างปลอดภัยโดยไม่เสี่ยงต่อความเสียหายต่อเมนบอร์ด
สินค้าทุกชิ้นรับประกันศูนย์
การรับประกัน : 6 ปี
การส่งสินค้า : ส่งสินค้าทั่วประเทศ

ข้อมูลสินค้า

 

Up to 54W via S-ATA and 24W via 4-pin

Up to 54W via S-ATA and 24W via 4-pin

When powered via it’s S-ATA interface (for 12V fans only), the NA-FH1 can run fans with a combined power draw of up to 54W. When using the 4-pin PWM input only (for 5V or 12V fans), the maximum power draw can go as high as 24W.

Controlling high-power fans safely

Controlling high-power fans safely

If both its S-ATA and 4-pin input ports are connected, the NA-FH1 will automatically draw power via S-ATA and use the 4-pin port for PWM control and RPM monitoring only. This way, it is possible to control fans with high power consumption safely without risking damage to the motherboard.

RPM and status monitoring

RPM and status monitoring

The NA-FH1 transmits the RPM speed signal of the fan connected to the first port to the motherboard for speed monitoring. For additional watchdog functionality, all ports feature status LEDs that light up if an RPM signal is being received and go off if the fan stops or fails.

Compatible with 4-pin PWM and 3-pin fans

Compatible with 4-pin PWM and 3-pin fans

While only 4-pin PWM fans can be controlled via PWM, the NA-FH1’s keyed output connectors are also compatible with 3-pin fans, so it can also be used to run multiple 3-pin fans from a single power source and to adjust their speed simultaneously by reducing the input voltage.

Suitable for 12V and 5V fans

Suitable for 12V and 5V fans

Supporting both 12V and 5V (4-pin power input only) operation, the NA-FH1 not only works great with 12V PC fans, but is also an elegant solution for running multiple Noctua 5V fans, many of which include USB adaptor cables that can be used to connect the NA-FH1 to mobile phone power supplies or power banks.

Ideal combination with optional NA-FC1 fan controller

Ideal combination with optional NA-FC1 fan controller

The NA-FH1 is ideal for controlling multiple PWM fans using the optional NA-FC1 controller. Thanks to a reverse-power design on the 4-pin input of the NA-FH1, the NA-FC1 can control the connected fans even if the hub is powered via its S-ATA interface only and if there is no other connection or input on the 4-pin interface.

Easy installation with magnets

Easy installation with magnets

The NA-FH1 features four strong neodymium magnets on the rear side, which allows it to simply snap into place on any magnetic surface such as inside steel PC cases. On non-magnetic surfaces such as aluminum PC cases, the flat rear side of the device makes it possible to easily fix it with double-sided tape or velcro tape.

30cm input cable included

30cm input cable included

The NA-FH1 is shipped with a 30cm NA-EC1 input cable to connect it to motherboard PWM fan headers. For applications that require further extending the input cable or extending the output cables to the fans, Noctua offers the NA-SEC1 (30cm) and NA-SEC3 (60cm) cable sets.

Overcurrent and short-circuit protection with safety fuses

Overcurrent and short-circuit protection with safety fuses

Especially when drawing power from a PC power supply via S-ATA connectors, short-circuits on the connected cables or devices can cause hazardous situations such as cable fires. For extra safety, the NA-FH1 has auto-resetting fuses both on the S-ATA and on the 4-pin input so that it can automatically shut down in case of overcurrent or short-circuits on one of the connected devices or cables.

Safety certifications

Safety certifications

Unlike many cheap fan hubs, the NA-FH1 has been carefully tested for product safety and EMC compliance. Carrying CE, UKCA and UL certifications and meeting all applicable standards (EN 62368-1, EN 55035, EN 55032, UL-507), it is a safe, quality device through and through.

6-year manufacturer’s warranty

6-year manufacturer’s warranty

Noctua products are renowned for their impeccable quality and outstanding longevity. Like Noctua’s fans and heatsinks, the NA-FH1 is a robust, dependable product that has been carefully engineered to stand the test of time.

 

Reference From : noctua.at

 

SPECIFICATION 

Output connectors 8x 4-pin PWM
   
Input connectors 1x S-ATA (for 12V fans only), 1x 4-pin PWM
   
Max. power via S-ATA input 54 W
   
Max. power via 4-pin PWM input 24 W
   
Operating voltage 5-12 V
   
Operating temperature -40°C to +60°C
   
Flammability class UL-94 V-0
   
Safety standards EN 62368-1, EN 55035, EN 55032, UL-507
   
Certifications CE, UKCA, UL
   
Size 93x43x12.5 mm
   
Weight 31 g
   
Fan compatibility All Noctua 12V and 5V fans, many third party fans
   
Scope of delivery NA-FH1 fan hub
  NA-EC1 4-pin PWM input cable
   
Warranty 6 years

 

 

 

หมายเหตุ :

1. ทางบริษัทฯ จะไม่รับผิดชอบหากเกิดการผิดพลาดของข้อมูล.

2. ลูกค้าควรตรวจสอบรายละเอียดสินค้าก่อนตัดสินใจสั่งซื้อ ทางบริษัทฯจะไม่รับเปลี่ยนหรือคืนเงิน.

3. สินค้าที่บริษัทฯ เป็นสินค้าใหม่และผ่านตัวแทนจำหน่ายที่ได้รับการแต่งตั้งจากผู้ผลิต.

4. ราคาสินค้าอาจมีการเปลี่ยนแปลงขึ้นอยู่กับตัวแทนจำหน่าย.

5. คุณสมบัติอาจมีการเปลี่ยนแปลง โดยมิจำเป็นต้องแจ้งให้ทราบล่วงหน้า กรุณาสอบถามได้ที่ตัวแทนจำหน่าย.

6. รูปภาพใช้ในการโฆษณาเท่านั้น กรุณาตรวจสอบได้ที่ตัวแทนจำหน่าย.

7. ทางบริษัทไม่มีนโยบายการคืนเงินที่ท่านได้ชำระมาตามจำนวนค่าสินค้าที่สั่งซื้อ หากท่านสั่งซื้อสินค้าและได้ชำระค่าสินค้าตามจำนวนแล้ว จะไม่สามารถยกเลิกหรือขอคืนเงินได้