AUDIO PERFORMANCE
Enjoy premium Sound Blaster audio quality over and above basic motherboard audio with a Signal-to-Noise Ratio (SNR) of 106dB. Plus, Stereo Direct lets you listen to your music pure and unprocessed at the amazing bit rate of 24-bit 192 kHz.
The Sound Blaster Audigy Rx also lets you enjoy a truly cinematic experience, supporting up to 7.1 multi-channel speaker output. It gives you an immersive, cinematic audio experience for your movies, games and more!
GUIDE TO 7.1 SETUP ON AUDIGY RX
How to connect the Sound Blaster Audigy Rx / Audigy 5 to 7.1 Speaker System - Using Sound Blaster's Proprietary Connectors
The diagram below illustrates the signal (pin-out) of the 7.1 connectors on Sound Blaster Audigy Rx / Audigy 5. While the 7.1 configuration for the Sound Blaster Audigy Rx / Audigy 5 is proprietary, there are other ways to achieve 7.1 output with cables that are widely available online and in most major electronics stores.
Pin | Description | Pin | Description |
---|---|---|---|
1 | Line-out 1 Jack (Front Left / Right) | 8 | Rear Right |
2 | Line-out 2 Jack (Rear Left / Right / Side Right) | 9 | Ground |
3 | Line-out 3 Jack (Center / Sub / Side Left) | 10 | Side Right |
4 | Front Left | 11 | Center |
5 | Front Right | 12 | Subwoofer |
6 | Ground | 13 | Ground |
7 | Rear Left | 14 | Side Left |
How to connect the Sound Blaster Audigy Rx / Audigy 5 to 7.1 Speaker System - Using Female RCA Connectors
The diagram below illustrates the cables required (purchased separately) to connect 7.1 speaker systems with female RCA connectors to the Sound Blaster Audigy Rx / Audigy 5.
The Sound Blaster Audigy Rx is an advanced sound card that represents the perfect upgrade from basic motherboard audio to immersive cinematic surround sound. With its advanced chipset designed to process our legendary EAX reverb engine, you can look forward to experiencing superb 7.1 multi-channel audio. It also features an SNR of 106dB and the Sound Blaster Audigy Rx Control Panel, a dedicated PC software that allows you full control of every aspect of your sound card.
If you're big on entertainment, you would also love it for its EAX Studio software that allows for additional hardware-accelerated environmental effects to your music, movies, games as well as for your voice input and communications.
Sound Blaster Audigy Rx features the Creative E-MU chipset, which was designed to process our legendary reverb engine EAX (Environmental Audio eXtensions) and deliver amazing cinematic audio playback effects without having to bog down your CPU. This ensures you get great quality effects and audio without affecting your computer's processing power.
The sound card has two microphone inputs to allow you to grab a friend to sing simultaneously! Or, use the second input to record the music accompaniment while you sing. The possibilities are endless!
With the 600-ohm headphone amplifier, the Sound Blaster Audigy Rx is able to drive the most demanding of studio headphones.
AUDIO RECORDING
Enjoy reduced latency with the support of Audio Stream Input/Output (ASIO) drivers, making Sound Blaster Audigy Rx the perfect solution for high-quality, low-latency audio recordings.
Keen to get started on recording right away? Sound Blaster Audigy Rx comes with recording software such as Creative WaveStudio and Creative Smart Recorder, so you can create your content immediately!
CUSTOMIZATION
Sound Blaster Audigy Rx Control Panel is a dedicated PC application that lets you control and customize every aspect of your sound card. You can adjust your Creative Multi Speaker Surround (CMSS or CMSS 3D) settings to upmix stereo content to hear yourself while you record so you can hear the effects instantaneously.
The powerful EAX Studio software lets you control and perform detailed adjustments to all of the EAX Advanced HD settings such as adding environmental effects to your music, movies and games, or change the key of your music on the fly to match your voice.
Creative E-MU
106 dB
PC - PCI-e x1
Optical Out:
1 x TOSLINK
Line In:
1 x 3.5 mm jack
Microphone In:
2 x 3.5 mm jack
Line Out :
1 x 3.5 mm jack (Front Out)
1 x 3.5 mm jack (Rear / Side R)
1 x 3.5 mm jack (C / Sub / Side L)
Headphone Out :
1 x 3.5 mm jack shared with Front Out
7.1 Channels
Windows® 10, Windows® 11
Up to 24-bit / 192 kHz
ASIO 2.0
Home Entertainment
Recording
REFERENTS FORM : https://us.creative.com/
หมายเหตุ :
1. ทางบริษัทฯ จะไม่รับผิดชอบหากเกิดการผิดพลาดของข้อมูล.
2. ลูกค้าควรตรวจสอบรายละเอียดสินค้าก่อนตัดสินใจสั่งซื้อ ทางบริษัทฯจะไม่รับเปลี่ยนหรือคืนเงิน.
3. สินค้าที่บริษัทฯ เป็นสินค้าใหม่และผ่านตัวแทนจำหน่ายที่ได้รับการแต่งตั้งจากผู้ผลิต.
4. ราคาสินค้าอาจมีการเปลี่ยนแปลงขึ้นอยู่กับตัวแทนจำหน่าย.
5. คุณสมบัติอาจมีการเปลี่ยนแปลง โดยมิจำเป็นต้องแจ้งให้ทราบล่วงหน้า กรุณาสอบถามได้ที่ตัวแทนจำหน่าย.
6. รูปภาพใช้ในการโฆษณาเท่านั้น กรุณาตรวจสอบได้ที่ตัวแทนจำหน่าย.
7. ทางบริษัทไม่มีนโยบายการคืนเงินที่ท่านได้ชำระมาตามจำนวนค่าสินค้าที่สั่งซื้อ หากท่านสั่งซื้อสินค้าและได้ชำระค่าสินค้าตามจำนวนแล้ว จะไม่สามารถยกเลิกหรือขอคืนเงินได้